Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Streamwood, IL
Chimney repair in Streamwood usually means one of two things: a cracked clay-tile flue in a 1960s ranch, or a leaking crown on a split-level where the mortar has been spalling for years without anyone noticing. Duke Chimney Sweep works on both, and we’ve served Streamwood since 2016. Most of the chimneys we open up in the 60107 ZIP show the same pattern: original masonry, original tile liners, and decades of Chicago freeze-thaw cycles doing what freeze-thaw cycles do. If your fireplace hasn’t been inspected since the last presidential administration, call (844) 660-6510 and we’ll get a camera up there before you light another match.
Why Streamwood Homes Are Different
Streamwood’s housing stock is overwhelmingly ranch and split-level homes from the 1960s, 70s, and early 80s. These houses were built at scale, and the fireplaces were spec’d the same way: masonry boxes with clay-tile flue liners, often sharing a chase with the furnace flue. The builders could not have known what 50 Illinois winters would do to those tiles. Each freeze-thaw cycle pushes moisture into the mortar, and each spring thaw lets it drain deeper into the structure. By the time we’re called, the typical chimney in Streamwood has a flue that looks like a cracked teacup.
There’s a second local factor worth naming directly. Streamwood homeowners burn a lot of tree-limb wood. The village has mature oaks and maples near the older subdivisions, and after storms, that wood gets stacked near the garage and burned through the winter. Limb wood is rarely seasoned properly, so it burns cooler and wetter. That produces creosote at a rate we don’t see in suburbs with gas fireplaces as the default. The result is a double concern on nearly every Streamwood job: creosote buildup on the interior and flue integrity behind it. One is a sweep. The other is a repair. We check both on the same visit.
And in the older Streamwood subdivisions, many fireplaces share a chase with the furnace flue. That means a chimney inspection here often uncovers furnace exhaust corrosion or a blocked shared flue that has nothing to do with the fireplace directly. A quick camera check of the whole chase is standard practice for us when we’re already on the roof. It’s saved more than a few Streamwood homeowners from carbon monoxide problems they assumed were unrelated to the fireplace.
Styles & brands we work with
Our Main Streamwood Services
Two services cover most of what Streamwood homeowners call us for. Both are part of the same venting system, and both are tied to what we see in the local housing stock.
Chimney Sweep in Streamwood
A chimney sweep in Streamwood is as much an inspection as it is a cleaning. Given the single-wall clay flues and the wet limb wood so many homeowners burn, we’re looking for creosote stages that indicate combustion problems as much as we’re looking for soot. Before we ever put a brush up, we run a camera through the flue to see what we’re working with. If there’s a crack, a sweep alone won’t fix it, and we’ll tell you that plainly. Streamwood’s peak season is Fall before the first fire, but a Spring sweep after the winter burn is just as useful, and often finds things that became visible only after the last ember died. Chimney Sweep in Streamwood.
Dryer Vent Cleaning in Streamwood
Most Streamwood homes route their dryer exhaust through a wall and outside, and the lint builds exactly where the duct turns. The older split-levels have longer runs than the ranches, and every additional foot of duct is another foot where combustible lint accumulates. We treat this as a technical service, not an add-on. The dryer vent and the chimney are both parts of the same exhaust infrastructure, and when one is compromised, it affects the whole system’s safety. If the dryer has been in place for years and the vent hasn’t been touched, there’s almost certainly a restriction you can’t see from the outside flap. Dryer Vent Cleaning in Streamwood.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Streamwood
Chimney repair in Streamwood is a different animal than in newer suburbs. The 1960s and 70s masonry here was built with clay-tile liners that crack under freeze-thaw expansion, and many of those homes are now facing their first major flue decision. A chimney that looks fine from the living room can have a flue with hairline fractures running the full height, and those cracks let heat and gases reach the brick and framing. Duke Chimney Sweep has served Streamwood since 2016, and we open every repair scope with a camera, not a guess. If the flue can be resurfaced, we recommend that path before full relining, and we use materials that chimney engineers actually specify. Learn more about our approach at Chimney Repair.
Chimney Cap Installation
Signs you need it
Water streaks down the flue interior after rain, or you’ve found animal nesting material at the base of the fireplace.
What it costs in Streamwood
Chimney cap installation in Streamwood typically runs $180 – $340 depending on flue size and chase access.
How we do it
We measure the flue opening, mount the cap with mechanical fasteners rather than friction fit, and verify the draw with a smoke test before we climb down.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, missing its screen, or was torn off by a storm and left the flue open.
What it costs in Streamwood
Replacement cap work in Streamwood runs $150 – $320, with the exact figure depending on the cap profile and whether the old one requires cutting out.
How we do it
We remove the old cap, clean the mounting surface, and install a new cap sized to the flue, not a universal fit.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the fireplace or you can see daylight through gaps between the flashing and the roofline.
What it costs in Streamwood
Flashing repair in Streamwood ranges $300 – $650 depending on how much of the old flashing is salvageable.
How we do it
We cut back the old sealant, repair or replace the step and counter flashing, then re-seal with a high-grade roofing sealant rated for freeze-thaw exposure.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, a dished center that holds water, or missing mortar sections along its edge.
What it costs in Streamwood
Crown repair in Streamwood typically costs $500 – $950 depending on whether we’re resurfacing the existing crown or rebuilding the overhang.
How we do it
We clean the crown surface, fill cracks with a flexible masonry sealant, and re-slope the surface so water drains away from the flue instead of pooling.
What Chimney Repair Costs in Streamwood
| Item | Typical range in Streamwood |
|---|---|
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $150 – $320 |
| Chimney flashing repair | $300 – $650 |
| Chimney crown repair | $500 – $950 |
The biggest cost drivers in Streamwood are roof pitch and chase height. A steep-pitch roof on a split-level requires staging and safety lines, and that labor shows up in a flashing or crown job. What we don’t do is invent work. If the tile liner has a hairline crack that can wait, we’ll tell you to watch it. If it can’t, the camera feed is yours to see before you spend a dollar.
Do I need a new liner if the camera shows a crack?
Not always. Hairline cracks in a single tile often call for HeatShield resurfacing rather than full relining. We only recommend replacement when the structural integrity is gone or the crack extends through multiple tiles.
How urgent is a leaking crown in Streamwood?
Before the next freeze-thaw cycle is the smart answer. Water that sits in the crown over winter expands and turns a small crack into a structural problem. Spring is not the time to discover it.
Brands We Service in Streamwood
We keep DuraFlex liner components, Copperfield caps, and HeatShield resurfacing material stocked on our trucks, so the common Streamwood repair doesn’t require a second visit. When we specify a product, it’s the same piece a chimney engineer would call for, not a hardware-store substitute. Our brands reflect that standard.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Streamwood, IL
| Service | Typical range in Streamwood |
|---|---|
| Chimney sweep (stone, brick, or masonry fireplace) | $169 – $169 |
| Chimney sweep (prefab or metal chimney) | $169 – $169 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $150 – $320 |
| Chimney crown repair | $500 – $950 |
| Chimney flashing repair | $300 – $650 |
| Dryer vent cleaning | $139 – $139 |
What pushes a Streamwood price toward the top of the range is usually roof access and liner condition. A straightforward one-story ranch with a standard flue will land lower; a steep split-level roof with a corroded chase will land higher. You’ll know the price before we start, and it won’t change mid-job.
Neighborhoods We Serve in Streamwood
Our trucks are in Streamwood every week, and we know the rhythm of the subdivisions: the ranches near Hilltop and Sunnydale with single-wall clay flues, the split-levels off Schaumburg Road with long dryer vent runs, and the older sections near South Park where the chase share with the furnace is common. Same-day or next-day scheduling is typical here during the fall sweep season.
- Sunnydale
- Hilltop
- South Park
- Sterling Heights
- The Meadows
Service Area – Cities Near Streamwood
Duke Chimney Sweep serves the full northwest suburban ring around Streamwood. You’ll find us regularly in Hanover Park, IL, Hoffman Estates, IL, Bartlett, IL, and Schaumburg, IL. If you’re in Streamwood or any of the neighboring villages, the same crew and the same camera-first protocol apply.
Serving Streamwood, IL — Our Local Coverage Area
We’re based in the Streamwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Streamwood
We schedule most Streamwood jobs within 48 hours, and during the fall sweep season we often have same-week availability in the 60107 ZIP. Call (844) 660-6510 and we’ll give you a specific date, not a window.
Most chimney repairs don’t require a permit in Streamwood, but if a structural rebuild or liner replacement is needed, the village may want to see the scope. We’ll tell you if your job crosses that line.
Yes. In the older Streamwood homes where the fireplace and furnace share a chase, we camera the entire chase as part of a standard inspection. It adds a few minutes and often explains problems the homeowner didn’t know existed.
If your Streamwood chimney hasn’t been inspected in the last few years, or you’re hearing water drip when it rains, call Duke Chimney Sweep at (844) 660-6510 for a free estimate. We’ll bring the camera, and we’ll show you what’s actually happening up there before you make any decisions.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Streamwood Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Michelle Meyer"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Divya Rao"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Scott Gallagher